| General |
| Label | Catalyst 2960-X 24 GigE PoE 110W, 2xSFP + 2x1GBT |
| Status | N1 |
| Device Type | Switch - 24 ports - Managed |
| Enclosure Type | Desktop, rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 24 x 10/100/1000 (8 PoE+) + 2 x Gigabit SFP + 2 x 10/100/1000 |
| Power Over Ethernet (PoE) | PoE+ |
| PoE Budget | 110 W |
| Performance | Switching capacity: 216 Gbps
Forwarding performance (64-byte packet size): 71.4 Mpps |
| Capacity | Active VLANs: 1023 |
| Jumbo Frame Support | 9216 bytes |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, CLI |
| Authentication Method | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
| Features | Full duplex capability, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, STP support, RSTP support, MSTP support, DHCP snooping, DTP support, PAgP support, TFTP support, ACL support, QoS, MLD snooping, DAI, Cisco EnergyWise technology, URPF, UDLD, Rapid PVST+, fanless, SRR, LLDP support, DHCP relay, LACP, MAC Address Notification, RSPAN, HSRP support, Energy Efficient Ethernet, MIB, MVR, SPQ, CoS, DSCP support |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX |
| Processor | : 600 MHz |
| RAM | 512 MB |
| Flash Memory | 128 MB |
| Status Indicators | Port status, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), PoE, link/activity |
| Expansion / Connectivity |
| Interfaces | 8 x 1000Base-T RJ-45 3 ports (PoE+) / 7 ports (PoE) - 30 W
16 x 1000Base-T RJ-45
2 x 1000Base-T RJ-45 uplink
2 x SFP uplink
1 x 100Base-TX RJ-45 management
1 x console RJ-45
2 x USB Type A
1 x mini-USB Type B management |
| Power |
| Power Device | Internal power supply |
| Power Redundancy | Optional |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Features | Redundant Power System (RPS) connector |
| Miscellaneous |
| MTBF | 462,680 hours |
| Compliant Standards | CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, RoHS 2011/65/EU, EN 300386 |
| Software / System Requirements |
| Software Included | Cisco IOS LAN Base |
| Dimensions & Weight |
| Width | 44.5 cm |
| Depth | 28 cm |
| Height | 4.45 cm |
| Weight | 5.8 kg |
| Manufacturer Warranty |
| Service & Support | Limited warranty - advance parts replacement - lifetime - response time: next business day
Technical support - consulting - 90 days |
| Environmental Parameters |
| Min Operating Temperature | -5 °C |
| Max Operating Temperature | 45 °C |
| Humidity Range Operating | 10 - 95% (non-condensing) |
| Min Storage Temperature | -25 °C |
| Max Storage Temperature | 70 °C |
| Humidity Range Storage | 10 - 95% (non-condensing) |
|